Home Guitars Amplifiers Accessories About Contact
Home :: Blog

CITES, Rosewood, and G&L Alternatives for Fretboards

August 23rd, 2017

G&L Rosewood FretboardIf you are interested in buying a G&L guitar and live in the USA, you can skip over this blog (unless you are curious). However if you live outside of the USA, as of January 1st, 2017 things got a little complicated.

CITES, the international organization that protects wildlife (animals as well as plants) implemented new restrictions on the use and export of Rosewood. Essentially Rosewood became a restricted material, and products containing Rosewood are now required to have documentation to verify that they are legally harvested.

How did this happen? It’s all about demand, and mostly in China where the expanding middle class developed a particular appetite for Rosewood furniture. The spike in demand created over-harvesting and illegal harvesting. Rather than see Rosewood wiped out, regulations have been put in place. You can debate the logic and methodology, but something needed to be done. Also note that “Rosewood” is a rather generic term that includes many varieties including Cocobolo, Bubinga, etc.

What are the practical implications?

The short story is that new guitars containing Rosewood manufactured after January 1st 2017 that are going to be exported out of the USA, need documentation verifying the sourcing of the Rosewood. Manufacturers have to apply for the paperwork and permits to export guitars containing Rosewood. There is of course a lot more to it than that, but that is the quick summary.

Dealers (like me) in most cases do not have this type of documentation; it’s the manufacturer that holds the permit. So most dealers will not be able to ship a post-January 2017 guitar with rosewood out of the country. It stands the risk of being confiscated at customs, and nobody gets the guitar back.

Guitars built before January 2017 can be shipped out of the country provided they have a re-export certificate. These are obtained from the Department of Fish and Wildlife. The certificates cost money, and take time to obtain. A dealer can also apply for a “Master File” and purchase re-export certificates in advance, but it’s still a process. Suffice to say, many dealers are just not going to bother with exporting a guitar with Rosewood.

This is bad for independent dealers selling overseas but a boon for distributors. International distributors buying directly from the manufacturer will get legally documented product, and far less competition from independent dealers exporting into their home country.

Non-commercial (person-to-person) sales are technically exempt. I can imagine this becoming a loophole as some dealers will have a relative or friend be the shipper of record on a guitar going out of the country.

G&L Alternatives

Aside from the occasional fancy top or limited editions, Rosewood on a G&L guitar is limited to the fretboard. The obvious alternatives are Maple and Ebony. Those materials can be exported freely without additional documentation.

If you are not partial to those materials, G&L has also started using a material called Chechen, also known as “Caribbean Rosewood.” It’s a hard and dense Central American hardwood that looks and feels very much like Rosewood. It has a more color variation than most rosewood, but it’s attractive and a good substitute. Most important is that is not subject to any restrictions and is widely available. Dealers with international customers looking for a way around Rosewood should consider Chechen.

Have an Open Mind

Traditional tone woods are just that: Traditional. They have obvious desirable qualities, but what they also have in common was that at the the time they were first used, they were widely available. And there were a lot fewer people on the earth. Guitar builders have been exploring new materials for decades, and many alternatives have been proven to be just as good as the traditional woods. Just like it very hard to get totally black ebony these days, guitar players will have to adjust to other paradigm shifts in guitar materials. In many cases the adjustment is more mental than sonic. Conventional wisdom dies a slow death, and there will always be players that cling to whatever “old way” they hold most dear.

If you want to play it totally safe, just avoid Rosewood. There are lots of other good materials both synthetic and natural. If you have your heart set on Rosewood, the sky isn’t falling, but obtaining that Rosewood guitar may take more diligence and planning.


How Fretboard Material affects Fret Finish

December 3rd, 2015

Once G&L started offering tinted satin neck finishes a few years back, they became our “go to” neck finish at UpFront Guitars. After all, they look good, feel nice, and are an attractive combination of looks and price point.

But whenever we got a gloss finish neck in the shop, it was always noticeable that the fret finish on a gloss neck was just that much better. There is a reason for that and here’s why:

A satin finish neck has a very thin finish. That’s part of the reason they feel nice, but it also makes the finish more fragile in regard to hand filing and polishing. A little slip can damage the thinner satin finish. For that reason the workers doing the final fret finish have to be more cautious, and consequently a satin neck may not be as highly polished as other fretboard materials.

Rosewood and even more so Ebony are more tolerant to the buffing and finishing process. Even if a fret file hits the fingerboard wood, it can usually be smoothed out to the point of being unnoticeable.

Gloss necks are unique in that the gloss finish is applied after the frets are installed. After the finish cures, the varnish must be removed from the frets. The very nature of this process smooths and rounds the frets to the highest degree. For this reason, a guitar with a gloss maple fretboard is likely to have the highest level of fret finish. But this finish level is not without a cost, and gloss finish necks have the highest amount of labor content and cost. Even for imported guitars the labor cost of removing varnish is not trivial, which is why you usually don’t see a gloss maple fretboard on a budget-price guitar.

The Take-Away: While highly polished and rounded frets have a visual and tactile appeal, we find that with G&L the level of fret finish on their satin neck certainly gets the job done. However if best fret finish and a maple neck is of primary importance, a gloss finish neck will be more appealing. A rosewood fretboard is a more economical way to get an attractive level of fret finish without springing for the cost of a gloss neck. In the end it comes down to cost, and it’s interesting to learn how the materials and finishes affect the manufacturing process.

What fretboard material for your G&L guitar?

August 12th, 2015

With many electric guitars, the choice of fretboard material is often not an option. The manufacturer can have many reasons for choosing a particular material — cost, looks, feel — short of a custom shop model, most guitars are built with a certain fretboard material and that’s the end of it.

Any G&L guitar is available with a choice of three materials, with rosewood and maple being no-cost options, and ebony as an up-charge. In addition, there is the added option of selecting a gloss or satin finish on the maple fretboard (all fretboard materials are available with satin or gloss finish maple necks). Many players feel quite strongly about fretboard material, but in my own experience the fretboard material typically plays a small part in how much I like or love a guitar (I never hate a guitar, but I might find myself uninspired). Quite often I choose the fretboard material (and finish or tint) based on how I want the cosmetics of the guitar to come out, and the price point I am trying to hit. A satin finish neck is the least expensive and a gloss neck with ebony fretboard is the most expensive. Keeping that in mind, here is quick rundown of the options:


The original Fender guitars were solid maple necks, and this was purely a matter of cost. Maple is hard, stable and cheap. Traditional classical instruments used rosewood and ebony, but Leo Fender was first and foremost a keen businessman and manufacturer. Around 1959, Fender started offering rosewood to give his guitars a more high-end look.

A satin or gloss finish maple neck is felt to have a tighter and brighter tone than rosewood, and depending on the finish tends to feel quicker too. A satin neck has a nice dry feel that does not get sticky or sweaty, whereas gloss maple does give the guitar a more finished look. I often opt for a tinted satin neck as a good combination of looks and feel. That being said, my favorite personal ASAT guitars have had glossy maple necks. If I like a guitar, it’s a package deal.

HINT: If you are stickler for nicely polished frets, a glossy maple fretboard always had the nicest fret finish. Why? The gloss finish is sprayed on after the frets are put in, then then the finish is polished off. This extra amount of finish work results in extra-smooth shiny frets. It’s also why glossy necks cost more. Time is money.


Rosewood is likely the most common material for fretboards. It’s a traditional material that’s attractive, reasonably dense and easy to work. Depending on cost, rosewood can vary from a very light brown to a dark, almost greasy feeling brown-black. My personal preference both for looks and texture is the darker streaky rosewood, and G&L typically sources pretty nice looking stock. Less expensive guitars will often have the lighter, plainer looking rosewood. Rosewood has a little more “grip” than maple, and is a touch warmer and less percussive. I like rosewood with Legacy guitars, as it does have a tendency to round out the tone. Good rosewood is not as plentiful as it once was, and exports and harvesting are tightly controlled.


While I’ve somewhat downplayed the difference between maple and rosewood, ebony does offer a noticeably different experience. Ebony is very dense, with a hard silky feel that sets itself apart from from even a glossy maple finish. Ebony produces the most percussive tone — is great for tapping and pulls — and works well with humbuckers or darker sounding woods. I specify ebony most often with ASAT Deluxe, Legacy HSS and Legacy HH guitars, as ebony tends to fit the tone, look, and ethos of these models. I had a customer order an ASAT Classic S Alnico with ebony and I really liked it. It made the neck pickup more snappy without making the guitar brighter overall. Ebony would not have been my first pick, but the net result was very pleasing.

While pricy, an ebony fretboard on satin maple with stainless frets practically plays itself. We’ve had a couple guitars built this way, and the glassy feel made a direct impact on how we approached playing those guitars.

Ebony is quite rare and the main source is Cameroon. Jet black ebony is most prized, but constitutes only a small proportion of harvest-able wood. Out of necessity “streaky” ebony is becoming more common, and it’s attractive in its own right. Taylor guitars co-owns an ebony mill in Cameroon, and imports of non-regulation ebony is what got Gibson heavily fined a few years back. Taylor has a very good video about ebony on YouTube, and it will give you a real appreciation about why it is so important to sustainably harvest this wood.

The Wrap

Looks are important, and when it comes to maple or rosewood, go with what “speaks” to you in terms of visual appeal and playing feel. If you like glossy, get glossy and don’t fret (no pun intended) about any tonal side effects. If you desire the fastest smoothest playing surface, or are looking at a humbucker model, ebony is definitely worth consideration.