Home Guitars Amplifiers Accessories About Contact
Home :: Blog

Spalted wood tops for both Looks and Tone

July 5th, 2018

While electric guitars and basses are first and foremost musical tools, for many players looks run a close second to tone. For years guitar builders have used various types of wood tops to enhance the looks — and sometimes tone — of solid and semi-hollow electric guitars. Flamed and quilted maple tops have been a perennial option from many manufacturers including G&L, Gibson, PRS, Fender, Godin and others. But one of the more interesting materials of late has been spalted woods. These materials are not part of the regular G&L price book, but they show up depending on availability.

sb2-tight

Spalted alder top on a G&L SB-2

Spalting is caused by fungus that attacks both live and dead trees causing unique coloration and figuring of the wood. It can lead to weight and strength loss, and also reduced density. So while you would not want to build a whole guitar out of a spalted wood, when stained and finished they are unique and eye-catching. Some guitar builders will also use dyes injected into the wood grain to accentuate the look even further.

Tone impact? – Maple tops have been used for years, and in many cases not only look good but have a beneficial impact on tone. This is especially true on set-neck, shorter scale guitars like a Gibson Les Paul, which tend to have a darker tone, and less pronounced attack and harmonics. The dense maple top brightens up the tone and is more reflective. It’s a good complement to warmer more mid-focused sound of mahogany, humbuckers, etc.

But maple as a top is not a particularly complex or rich sounding material. While this works well to “liven up” a Les Paul, the effect is different on a bolt-on, longer scale guitar with single coil pickups. Maple combined with the snappy, more focused tones of a single coil can sound a little dry and one-dimensional. We’ve had maple tops on various G&L’s, and our impression is that they have very clear emphasis on the fundamental note, but not a lot of complexity. We are not totally down on maple, but it benefits from fuller sounding pickups and more complex sounding woods for the back materials: Think humbuckers, most MFD’s (maybe not the Z-coil) and swamp ash.

The spalted woods tend to be different, and our own hypothesis is that the effect of the spalting makes them less dense and softer, even when the material is maple. We’ve found spalted top guitars to be every bit as complex and musical as a good swamp ash bodied guitar. The top may lend even more warmth and richness, but with no two guitars ever being exactly alike, we don’t want to go overboard on analysis. Suffice to say on something like a G&L or other single coil guitar, we very much like the sound of a spalted top, and feel it complements the tone.

Other Materials? – While not a spalted wood, we find Black Limba works nice on G&L-style guitars too. Limba is mahogany-like in tone — though actually not part of the mahogany species — and a Limba cap adds some warmth and mid-range emphasis to a single coil, bolt-on guitar. And it looks pretty. Something we would not do? Maple and Empress: That’s bright/focused on top of bright/focused. It might work on a bass (we like Empress for a bass) but would be as dry and crisp as James Bond’s Martini.

G&L Kiloton Black Limba top

G&L Kiloton Black Limba top

Choosing the cosmetics of your guitar is a fun part of the buying process. But choosing just on looks can have unintended consequences. Keeping in mind what works well together, it’s completely possible to combine both good looks and good tone.

 

Flame and Quilt Maple tops for G&L Guitars

January 22nd, 2017
flame maple top on ASAT Special from UpFront Guitars

A G&L Flame Maple top on an ASAT Special

Quilt Maple Top S-500 UpFront Guitars

A very deep Quilt Maple top on a G&L S-500

One of the snazzier options for a G&L guitar — or any guitar — is the addition of a flame or quilt maple top. The grain pattern in these woods is produced by cutting specific varieties of  maple in a direction that highlights the grain or figuring of the wood. This technique has been around a long time, and violin builders have been using flame maple — especially for instruments backs — for ages.

A maple top is both cosmetic, and to some degree sonic, and guitar builders frequently employ maple to add brightness. In particular it pairs well with mahogany solid bodies, which otherwise can be a little dark or muddy. So while they look great, is this a good idea as an option for a G&L guitar?

In theory, woods that are more hard and dense tend to add brightness. I guess one way to think about it is that they are more reflective than absorptive. Maple being quite hard tends to accentuate high frequencies. Single coil guitars like a G&L probably don’t need maple for the purpose of brightness, although an exception to this might be the ASAT Deluxe which has two humbucker pickups. In this case the classic pairing of mahogany body and maple top is a natural. Or a Bluesboy, which has a warm and woody Alnico 2 neck humbucker. And while the Fallout is thought of as a “simple” guitar, from personal experience the P-90 and Humbucker pairing responds nicely to a maple top, and looks very cool. Tuxedo Punk, if you will.

But will a maple top ruin your ASAT, S-500 or Legacy? No it won’t, and in the case of the MFD pickups they have plenty of depth and body to work well with a maple top. With any Legacy or traditional ALNICO pickup it can get pretty bright, especially at the bridge. But if you like the look, don’t be shy: After all you do have tone controls. The concept that guitars sound best with all the controls up is just not so. Personally I don’t think any P-90 sounds best wide open, but I love them with a little bit of volume or tone roll off. You paid for those knobs, so use them.

In the extreme, it is possible to create a guitar that is too bright. Maple will add some brightness, certain body woods will add brightness, a vibrato bridge is brighter than a hard tail, and so on. I did have a customer order a Comanche, quilt maple on Empress wood, and vibrato bridge. Between the wood, pickups and bridge it was about as zippy as you an get. I actually thought it sounded good, but he was never quite happy and changed out the pickups. In general, the pickups are the greatest driver, with body wood and bridge type being the next biggest factors. Fretboard material in my opinion matters least.

And remember, you do have tone controls….so build something you dig looking at.

Little known G&L product options – Logo Delete

February 14th, 2016

asat-qmt-hsOne no-cost option that we’ve grown rather fond of is the “Logo Delete” option for G&L headstocks. Just as it implies, the Logo Delete option gives you just the G&L logo without any model designation. We think it gives the guitar a nice clean appearance, and if you are doing a model that has no specific logo — such as a Bluesboy — you might even say it makes sense. Some players have never seen this option before, and one prospective buyer asked if it was a replacement neck.

Because they don’t have decals for every possible color combination, matching painted headstocks almost always come with a logo delete.

leg-hb-lemon-hs

G&L Legacy, gloss finish with standard logo

We like the look, and have ordered several guitars in this style.

What fretboard material for your G&L guitar?

August 12th, 2015

With many electric guitars, the choice of fretboard material is often not an option. The manufacturer can have many reasons for choosing a particular material — cost, looks, feel — short of a custom shop model, most guitars are built with a certain fretboard material and that’s the end of it.

Any G&L guitar is available with a choice of three materials, with rosewood and maple being no-cost options, and ebony as an up-charge. In addition, there is the added option of selecting a gloss or satin finish on the maple fretboard (all fretboard materials are available with satin or gloss finish maple necks). Many players feel quite strongly about fretboard material, but in my own experience the fretboard material typically plays a small part in how much I like or love a guitar (I never hate a guitar, but I might find myself uninspired). Quite often I choose the fretboard material (and finish or tint) based on how I want the cosmetics of the guitar to come out, and the price point I am trying to hit. A satin finish neck is the least expensive and a gloss neck with ebony fretboard is the most expensive. Keeping that in mind, here is quick rundown of the options:

Maple

The original Fender guitars were solid maple necks, and this was purely a matter of cost. Maple is hard, stable and cheap. Traditional classical instruments used rosewood and ebony, but Leo Fender was first and foremost a keen businessman and manufacturer. Around 1959, Fender started offering rosewood to give his guitars a more high-end look.

A satin or gloss finish maple neck is felt to have a tighter and brighter tone than rosewood, and depending on the finish tends to feel quicker too. A satin neck has a nice dry feel that does not get sticky or sweaty, whereas gloss maple does give the guitar a more finished look. I often opt for a tinted satin neck as a good combination of looks and feel. That being said, my favorite personal ASAT guitars have had glossy maple necks. If I like a guitar, it’s a package deal.

HINT: If you are stickler for nicely polished frets, a glossy maple fretboard always had the nicest fret finish. Why? The gloss finish is sprayed on after the frets are put in, then then the finish is polished off. This extra amount of finish work results in extra-smooth shiny frets. It’s also why glossy necks cost more. Time is money.

Rosewood

Rosewood is likely the most common material for fretboards. It’s a traditional material that’s attractive, reasonably dense and easy to work. Depending on cost, rosewood can vary from a very light brown to a dark, almost greasy feeling brown-black. My personal preference both for looks and texture is the darker streaky rosewood, and G&L typically sources pretty nice looking stock. Less expensive guitars will often have the lighter, plainer looking rosewood. Rosewood has a little more “grip” than maple, and is a touch warmer and less percussive. I like rosewood with Legacy guitars, as it does have a tendency to round out the tone. Good rosewood is not as plentiful as it once was, and exports and harvesting are tightly controlled.

Ebony

While I’ve somewhat downplayed the difference between maple and rosewood, ebony does offer a noticeably different experience. Ebony is very dense, with a hard silky feel that sets itself apart from from even a glossy maple finish. Ebony produces the most percussive tone — is great for tapping and pulls — and works well with humbuckers or darker sounding woods. I specify ebony most often with ASAT Deluxe, Legacy HSS and Legacy HH guitars, as ebony tends to fit the tone, look, and ethos of these models. I had a customer order an ASAT Classic S Alnico with ebony and I really liked it. It made the neck pickup more snappy without making the guitar brighter overall. Ebony would not have been my first pick, but the net result was very pleasing.

While pricy, an ebony fretboard on satin maple with stainless frets practically plays itself. We’ve had a couple guitars built this way, and the glassy feel made a direct impact on how we approached playing those guitars.

Ebony is quite rare and the main source is Cameroon. Jet black ebony is most prized, but constitutes only a small proportion of harvest-able wood. Out of necessity “streaky” ebony is becoming more common, and it’s attractive in its own right. Taylor guitars co-owns an ebony mill in Cameroon, and imports of non-regulation ebony is what got Gibson heavily fined a few years back. Taylor has a very good video about ebony on YouTube, and it will give you a real appreciation about why it is so important to sustainably harvest this wood.

The Wrap

Looks are important, and when it comes to maple or rosewood, go with what “speaks” to you in terms of visual appeal and playing feel. If you like glossy, get glossy and don’t fret (no pun intended) about any tonal side effects. If you desire the fastest smoothest playing surface, or are looking at a humbucker model, ebony is definitely worth consideration.

 

 

G&L 2015 Mid-Year Model Changes

June 22nd, 2015

As of July 1st 2015, G&L is making some of the more significant model specification changes in quite some time. G&L has gone through their whole lineup, and practically no guitar remains untouched in some way or another. Pricing is changing too, both in the form of some increases, and how guitars are priced relative to each other. There is a lot to take in, but here is a rundown on the more notable changes to the guitars, along with some commentary.

Neck Profiles

For years the #1 “C” profile neck with 12″ radius has been standard on most G&L guitars. On the Legacy and ASAT line this is now changing to the “Modern Classic” neck. The Modern Classic neck is 1-11/16 at the nut with less of a taper than the #1 neck (now .830 at the 1st fret to .870 at the 12th). On the ASAT and Legacy line the standard radius is 9.5″.

Also of note is that G&L has separated neck shape from radius. And in the dealer price list there are separate options for fingerboard radius (7.5, 9.5, 12) and for profiles. So pretty much you can mix and match anything for one up-charge. You don’t get dinged twice for radius and shape.

Why the new profile on their most popular guitars? One thought is that a frequent question I get is, “which profile is most like a Fender?” The Modern Classic is a pretty close fit. In addition there were occasional complaints about string fall-off with the #1 neck, and the slightly wider nut width of the Modern Classic will help this. Most of the other profiles remain (C, Wide C, U, V, etc.) with slight name tweaks. G&L still offers more options than just about anyone on a production guitar. However, a couple guitars — namely Fallout and SC-2 — do not offer neck profile options.

Here is a quick rundown of the more popular guitar and bass models and their new profiles:

  • ASAT – Modern Classic 9.5″
  • Legacy – Modern Classic 9.5″
  • Fallout – Slim C 12″
  • Invaders – Modern Classic 12″
  • S-500 – Modern Classic 9.5″
  • Comanche – Modern Classic 9.5″
  • SC-2 – Classic C 12″
  • ASAT Bass – 1.5 nut width Medium C 9.5″
  • L-1500 and 2000 – 1-5/8 Medium C 9.5″
  • M-2000 – 1-5/8 Medium C 9.5″
  • 5- String Bass – 1-3/4 Medium C 12″
  • JB – 1.5 Medium C 9.5″
  • LB – 1-5/8 Medium C 9.5″
  • SB – 1-5/8 Medium C 9.5″

Discontinued Models

G&L has thinned the herd slightly, and here is what I noticed. Nothing really earth shattering here; and from personal experience these models have either run their course, or never took off:

  • ASAT Special Deluxe
  • Legacy Deluxe (No pickguard, Flame Maple Top)
  • S-500 Deluxe (Ditto)
  • S-500 Semi-Hollow
  • Will Ray Signature
  • MJ Series bass guitars (Back in – recently amended)
  • JB-2 Bass
  • “Rustic” series products

Pickups

While there are no changes to their single coil pickups, G&L will be using Seymour Duncan pickups only in the Rampage, Bluesboy and ASAT Deluxe models. All other models – Fallout, Legacy, Invader — will use G&L’s own Alnico humbucker pickups. G&L is of course known for their pickups, and there also some cost savings involved with using their own product versus sourcing from someone else. These are the same Paul Gagon designed pickups as used in the Tribute series, and they are made in Fullerton by G&L. The Duncan pickups will be available as an extra cost option, and if you must have them, the up-charge is well below the cost of going out and buying a set.

How do the G&L Humbuckers sound? We’ve played the G&L Alnico humbucker pickups, and in most cases we are talking about the bridge pickup in the Legacy and Fallout. The resistance is in the 13K range versus 16K for the Duncan JB. The G&L pickup is a little warmer in tone, with a softer high end. It lacks some of the top end sharpness of the JB which depending on your point of view is a good thing. When gained up it’s smooth with creamy tone, and again less sharp and buzzy than the JB. We recommend giving it a try, and of course there are a zillion aftermarket options.

The potential backlash with the G&L pickups is that some will say that this just makes the USA and Tribute models more like each other. I can’t argue that point, and my feeling is that while import guitars are important to the industry, (after all imports are >90% of the total US guitar market) using the same pickups in both the USA and import lines sends a confusing message to the consumer.

Model Name Changes

  • Legacy HB is now the Legacy HSS
  • Legacy 2HB is now the Legacy HH

Pricing

Prices have gone up, but also they have shifted. The basic Legacy and ASAT guitars now have the same MAP price. Historically the ASAT was always more money. The SC-2 and Fallout are also the same MAP as the Legacy, and the S-500 is still a little more. The MAP on all these guitars is $1299 (S-500 $1399), and includes the standard burst or solid finishes, alder body, satin finish neck with maple or rosewood fingerboard, white pickguard and tolex case. It’s also of note that the Legacy HSS and HH models are now the same price as the standard Legacy, so no penalty for humbucking pickups. The Legacy Special is still a little more, and last time we looked those pickups were supplied by Kent Armstrong.

There are also minor price changes on some of the options, but nothing game-changing. And yes, stainless steel frets are still expensive. Our understanding is that they chew up the tools very quickly and of course take a lot more labor and Plek time.

The pricing relationship between List and MAP is also different, and the MAP is now about 30% off list. Without going into great detail, buyers who typically assume they can strike a deal below MAP will find dealers more reluctant to negotiate than in the past. As Fender has done, the MAP price really reflects the true street price, and the battle continues to preserve price and brand value in the cyberworld.

Wrap Up

While nobody likes to see a price increase, G&L still offers a unique value in a USA guitar that can be made to order. As far as these changes go, I think most of them make sense either commercially, or in terms of what the market really wants. And if you really want a “Pre-July” G&L you can still option a guitar to come out that way. So nobody is left out in the cold. That is unless you want an ASAT Special Deluxe.

What should your G&L guitar weigh?

January 3rd, 2014

Of all the questions I get asked from prospective G&L buyers, “what does the guitar weigh?” is one of the most frequent. Besides reminding me that I should just weigh every guitar as soon as it arrives, guitar weight and its purported benefits is a hotly debated topic.

How much a guitar weighs has obvious implications such as playing comfort, but it has also been ascribed with many other qualities such as tone, resonance, and sustain. There are various theories and schools of thought: Some feel that lighter guitars are more resonant, other believe that heavy guitars have better low end, and so forth. My own experience — and this will seem like a cop-out to some — is that all guitars are “different” and that the tonal qualities of any guitar is the sum of its parts. Personally, having a lighter weight guitar is nice from the viewpoint of playing a 3-hour gig, but a guitar that weighs 8.5 pounds is not onerous either. After all, bass players survive often playing instruments that weigh upwards of 9-10 pounds. And let’s not forgot the Les Paul players out there, and very few of those guitars weigh under 8.5 pounds.

After working on a couple hundred G&L guitars, I’ve got a pretty good feel as to what they are going to typically weigh. So depending on the particular model of guitar, here is a rundown of what you can expect for guitar weights.

ASAT – The ASAT (Telecaster) body style is pretty good chunk of wood, and you can expect an Alder ASAT to weigh around 7.8 to 8.4 pounds. In terms of weight Alder is quite consistent, and these guitars do not vary that much. Guitars with premium transparent finishes are usually Swamp Ash, and this can run anywhere from 7.6 to 9.0 pounds. There is quite a bit more variability in Swamp Ash, and most guitars are in the 8 – 8.4 range, with fewer of them coming in under 8 pounds. There are examples of very light Swamp Ash guitars out there, but it’s difficult to source consistently lightweight material, and a medium-volume builder like G&L does not have the luxury of being that selective. While G&L does not advertise it, you can opt to get a transparent premium finish on Alder. The grain is not as striking, but they can look very nice in their own way, and will generally weigh less.

One way to trim a little heft from your ASAT is to get the optional top and rear body contours (like the Legacy/Strat contours). These contours can increase playing comfort plus shave a few tenths off the guitar weight. The consistently lightest ASAT’s are of course the semi-hollow models. These ASAT Classic and Special semi-hollows are always swamp ash — so there is a little more variability — but they never exceed 8 pounds, and are usually in the 7 – 7.5 range. A customer recently ordered a semi hollow ASAT Special, and was quite unhappy when it turned out to weigh 8 pounds (it’s the heaviest semi-hollow I’ve come across). Chalk this up to two factors: The variability of swamp ash, and that he ordered the vibrato bridge option, also a first for me on an ASAT. Steel weighs more than wood, and weight gain of the bridge is not compensated for by the extra routing of the body.

The Mahogany Body/Maple Top ASAT Deluxe models generally tip the scales at about the same weight as an alder model. The ASAT Deluxe semi-hollow is one of their lightest ASAT models, and ranges from 6.8 to 7.5 pounds.

The limited edition chambered Savannah series are real feathers. Made from Okoume with a Korina top, they rarely exceed 7 pounds. The solid body Korina series from 2012 were quite hefty, but that sure did not hurt how they sounded.

OLS Body Option – In 2015 G&L started offering the “Original Leo Spec” body thickness as a no-cost option for the ASAT. This body is about 1/8″ thinner and can shave off about 1/3 of a pound. It’s kind of a no-brainer in terms of comfort and weight.

Legacy/S-500/Comanche – Being slightly thinner and more contoured than the ASAT, an Alder Legacy with a vibrato bridge is consistently in the 7.6 to 8.0 pound range. As with the ASAT, Swamp Ash guitars will weigh a little more, sometimes in the low 8’s. Hardtail guitars are usually a tad lighter, and we have a hardtail Legacy Special in swamp ash that tips the scales at 7.2 pounds. As we’ve said, you can get lucky with swamp ash and get a really light guitar, but there is no way to predict it. We’ve never had a semi-hollow Legacy in the shop, but you can likely expect those guitars to come in around 7 pounds. There are other Legacy permutations such as the Legacy Deluxe and Invaders, both which have mahogany bodies and maple tops. Generally speaking, these guitars tend to weigh around eight pounds, but we have not handled enough of them to have a feel for the typical weight range.

SC-2 – Those who like the ASAT but are really concerned about weight will find the SC-2 easy on the back. Although it has the same pickups as the ASAT Special, the thinner body and slightly narrower waist is just naturally lighter, and the heaviest SC-2 the we’ve seen was a 7.8 pound swamp ash guitar. We’ve also seen them as light as 6.6 pounds. The new Fallout guitar is the same body as the SC-2.

Wrap Up

Light weight is often a desirable quality, but tends to get overemphasized in the buying process. It’s generally not a highly accurate indicator of tone, although like a lot of things with guitars, the intangible “feel” of an instrument is in the hands of the beholder. How much weight matters is related to how you plan to use the guitar. If you play clubs every weekend, a lighter instrument is a considerable advantage. If you play mostly at home or do studio work, an extra pound should be lower on the list of concerns. There are a lot of great instruments out there that deserved to be played. Don’t let a few ounces stand between you and a great musical experience.

For guitar offerings from Upfront Guitars:  www.upfrontguitars.com

Which G&L: Legacy or S-500?

August 19th, 2013

Hands down, the Fender Stratocaster® is the world’s most popular guitar, and has spawned probably hundreds of copies. Being also designed by Leo Fender, the G&L Legacy is what we can assume to be the evolution of the Strat: Improved floating bridge, updated tone controls, and slightly fatter pickups (compared to a vintage style Fender anyway). The Legacy looks and feels a lot like a Strat, but the tonality of the bridge, slightly beefier neck and the pickups gives it the G&L vibe. Plus you can pretty much spec out your own G&L, but that’s for another day.

The “other” Legacy — the S-500 — often gets left out of the conversation. With it’s G&L Magnetic Field Design (MFD) pickups, the S-500 has slightly different, more industrial look. And while rock ‘n roll is supposed to be the music of rebellion, guitarists can be very conservative, and things that deviate from “vintage” often get rejected. With the exposed socket head pole pieces of the S-500 pickups, the guitar looks just different enough to get passed over by some players as “not right.”

But is the S-500 a better guitar?

Possibly “better” is the wrong word choice, but the S-500 is possibly a more useful guitar in the context of playing and performing. It’s in the best commercial interests of G&L to produce something that is essentially akin to a Stratocaster. While I can’t say for certain, it’s probably G&L’s best selling model too (though I sell more ASAT’s than Legacy’s). But the G&L MFD pickup is intended to be an improvement over the conventional Alnico pickups designs, and in theory the S-500 is supposed to be an evolutionary step forward.

The basic concept behind the MFD pickup is that it’s really built more like a P-90, with a ceramic bar magnet underneath, and with six adjustable steel pole pieces. The MFD pickups also have a fairly low coil resistance, but a stronger, broader magnetic field. The low coil resistance results in a more even frequency response, but the magnetic field creates a greater signal output. The result is a fairly “hot” single coil with a full frequency response, and none of the peaks and hot spots characteristic of an over-wound conventional pickup.

Sound Comparison

The overall sound of an S-500 versus a Legacy is that it’s a little fatter and warmer. The tone is slightly darker, there is less midrange scoop, and they are not as glassy and bright on the top end. Sounds terrible doesn’t it? Well not really, especially given the fact that nearly all rock music these days is played with some amount of overdrive or distortion. The greater midrange, output and lack of icy top end of the S-500 makes it a great choice for more modern sounds. Overdrive tones with the S-500 are rich, harmonic, and much fuller than than a guitar with conventional pickups. The bridge pickup is absolutely more useable than a Strat bridge pickup, and the in-between tones of the neck + middle and middle + bridge are also punchier and less brittle. The higher output and slightly attenuated high end works great with pedals too.

In the context of playing live, the S-500 holds up very well, and can be heard in the mix without getting shrill or piercing. The extra heft of the MFD pickups and their fuller, creamier overdrive tones project very well, and fit many styles of music from classic rock to progressive. Bedroom tone and live tone are very different animals, and while the S-500 may lack some of the glassy cleans of a Legacy, it’s a great tool for covering a wide range of musical styles.

I will reference a story that has been told several times in different publications: Jimi Hendrix was known for using a long, cheap Radio Shack coil cable with his Strat. Coil cables are notorious for having a lot of electrical capacitance, which cut high frequencies, boosts the midrange, and makes the tone darker. The net effect of Strat + Coil cable is a warmer, darker Strat with less high end.

Blues legend Buddy Guy has often performed live with a Stratocaster equipped with Fender Lace pickups. These are noiseless dual coil (humbucking) designs that sound very clean but have a lot body and output. For years Clapton Strats have used active EQ and noiseless (humbucking) pickups. While I hesitate to drop names like these in this lowly blog, they are good examples of true guitar heroes that don’t always adhere to tradition and pure vintage setups.

Cheap Advice

If general jamming, low volume playing, or traditional blues, funk and rock tones are your bag, the G&L Legacy is great choice. You’ll hear the sound you hear on the records. And as there is a plethora of aftermarket pickups that will drop right in, you’ve got huge leeway to experiment. If you really like to rock and can deal with the look, go for a Legacy HB with the bridge humbucker.

If you tend to play out, use effects, and cover a wide range of music (such as a cover band) the S-500 is worth serious consideration. While it can’t cop the pure scooped glassy tone of a Strat or Legacy, it’s still single coil in nature, but can morph in many different directions with ease. You can experiment and mix MFD pickups with conventional pickups, but visually the guitar may look a little mongrel. Personally, MFD’s respond differently than conventional pickups, and I don’t mix them.

The S-500 is meant to be in some ways a “better” guitar, and depending on what your needs are, it really is.

For guitar offerings at Upfront Guitars:  www.upfrontguitars.com