CIOKS 8 *Extension to DC7* Pedalboard Power Supply

Go big or go home...and with the CIOKS 8 Expander you can add 8 additional high power outlets to your CIOKS DC7 for the ultimate power trip. And best of all, the CIOKS 8 is powered off the DC7 with the included 24V power connector cable. If that is not enough, you can daisy chain another CIOKS 8 (or CIOKS 4) to your CIOKS 8. And like the DC7, every CIOKS 8 output is configurable from 9-18 VDC with up to 300mA available at 18 volts. No other power supply has the flexibility and adaptability at each available output like CIOKS Future Power Generation series of power supplies. If you are building a pedalboard that will be visible from space, the CIOKS 8 Expander is your booster rocket.

And like all CIOKS power supplies it's easy to mount, low profile, has great documentation, comes with all the cables you need to get started, and is built like a brick you-know-what. No pedal power solution is better built or more flexible than CIOKS. If you are serious about powering your board, CIOKS is an excellent choice. 

In the words of CIOKS....

CIOKS 8 is our largest switch-mode power supply extender and it features 8 isolated outlets which each deliver 9V DC with 660mA. All eight outlets offer four selectable voltages (9V, 12V, 15V and 18V).

CIOKS 8 was primarily designed to be used as a large extension to DC7 in case you need more outlets. If you are looking for a super powerful power supply setup to power a large pedalboard, the combination of CIOKS DC7 and CIOKS 8 will definitely be an awesome solution as this combo will give you 15 isolated outlets in total with 4 switchable voltages on each outlet plus a 5V USB outlet to charge your smartphone or tablet (courtesy of DC7).

Features:

• CIOKS 8 has the same groundbreaking 1-inch profile (25,4mm) as CIOKS DC7
• Ultra-low noise achieved by multistage filtering
• 8 isolated DC-outlets, 6W each
• 660mA at 9V DC on each outlet
• 4 selectable voltages on each outlet
• Global overload status LED
• Total maximum output power 48W
• Mounting hardware for Pedaltrain and Templeaudio boards included
• Compatible with CIOKS GRIP for drill-free mounting on Pedaltrain boards
• 12 Flex cables included
• 24V DC Link cable included
• Designed in Denmark, assembled in Poland
• 5-year worldwide warranty

• Outlet 1-8:
• 9V DC / 660mA or
• 12V DC / 500mA or
• 15V DC / 400mA or
• 18V DC / 330mA each 

• CIOKS 8 power supply
• 12 Flex cables
• 50cm DC Link cable (to connect to CIOKS DC7)
• Mounting hardware (2 screws and a hex-key)
• Product sheet (drill guide)
• Flex and DC Link cable selection guide
• Sticker (sheet with 2pcs.)
• Manual