Skip Navigation Website Accessibility
UpFront Guitars and Music LLC

Tues-Thur 12-6pm
Fri 10-6pm
Sat 10-4pm
508-657-1817
Gift Certificates Available-click here!

 
 Why UpFront?  |  Contact Us  |  View Cart  Family owned and operated
Voted Best in Music 2023!!Voted Best in Music 2023!! Thank you!
 


Walrus Audio EB-10 Preamp/EQ/Boost (Black) Pedal

Do you consider yourself a control freak when it comes to tone. Then the Walrus EB-10 is for you. A true parametric EQ with four store-able presets and a boost switch, the EB-10 is the perfect tool for players with multiple guitars or multiple moods. The three-band EQ of the EB-10 allows you to dial in any guitar (or guitars) to perfection, and lets you switch between instruments without having to fiddle with amp settings and the like. And there is a 10dB MOSFET boost switch to compensate for low output instruments, or to give your leads extra punch. Lastly three internal trim pots let you set the center frequency and "Q" of the Mid Band control. Did they forget anything? We don't think so, and there is no such thing as too much control.

In the words of Walrus Audio:

A tone tweakers delight, the EB-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.

Use the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had. 

The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.

Specs

  • The EB-10 comes coated in Prismatic Powders, Matte Black and Cream enclosures with art inspired by vintage studio equipment. Design by Tyler Evans.
  • The die-cast enclosure’s exact size is 3.68” x 4.67” x 1.547”.
  • Power requirements are 9VDC, center negative (100mA minimum).
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
  • Power supply not included.